A diamond’s measurements describe its physical dimensions in millimeters, expressed as length × width × depth. These dimensions help indicate the diamond’s overall size, proportions, and face-up appearance, providing a more complete picture of its visual presence than carat weight alone

Cut measures how well a diamond reflects light back to the viewer, maximizing three optical effects: brilliance (white-light return), dispersion or fire (light split into spectral colors), and scintillation (the flashes and contrast seen as the stone moves). A well-proportioned diamond appears bright and alive; a poorly cut one looks dull and lifeless.

Learn more →

Fluorescence is the visible glow — usually blue — a diamond emits under UV light such as sunlight; it isn't visible in normal lighting and is graded None through Very Strong. For most diamonds it has no noticeable effect, and in lower color grades (around H–I and below) a faint blue can actually make a stone look whiter. Very strong fluorescence occasionally causes a hazy look.

Learn more →

A diamond’s length-to-width ratio describes the relationship between its length and width, determining how elongated or compact it appears. 1.00 is square, higher numbers are progressively more elongated. The ratio is a preference but it is especially important for fancy-shaped diamonds, such as ovals, cushions, emerald cuts, and radiants, where it can make a diamond look more or less elongated so most shapes have a preferred range.

Polish grades the smoothness of a diamond's finished surface — how cleanly each facet was polished, free of microscopic marks like scratches, pits, or polish lines seen under magnification. It runs from Excellent to Poor; higher polish lets light pass through the surface cleanly for maximum brilliance.

Symmetry grades the precision of a diamond's physical facets — how evenly its facets are shaped, aligned, and meet: even meet-points, a centered table, and matched opposing facets. It runs from Excellent down to Poor; higher symmetry is a mark of careful craftsmanship and helps the diamond return light evenly.

Depth % is the diamond's height (table to culet) divided by its average width. It's a core cut proportion: too shallow and light leaks out the bottom, too deep and it escapes the sides — either way the diamond looks less brilliant. Ideal ranges depend on the shape.

The table is the large flat facet on top of the diamond; table % is its width relative to the diamond's diameter. Together with depth it governs how light enters and returns — a well-balanced table trades off brilliance and fire. Ideal ranges depend on the shape.